...
1, not functional as possible: the more functions, consumers will feel more value, but generally as long as with the "seating induction", "seat heating", "warm water", "air drying" " automatic deodorant "," massage cleansing "," power "and other functions will be enough. Most brands now on the market in several key functions that are doing better, the difference lies in the details of the performance.
2, the safety factor the higher the better: purchase must meet national standards depends on whether, and to require the production of relevant documents.
3, sewage capacity: Ok smart toilet sewage thoroughly, wash area, noise, water, smooth surface, low water absorption.
4, is easy to clean: careful observation of the surface of the toilet, in the light to see if the floodlight, and then to touch the surface should be smooth, smooth, color crystal; no obvious needle, lack of glaze and cracks; tap toilet, clear and melodious voice, no cracking sound, shape without deformation. Reach out to the outfall, to see whether there are glazed drain.
5, emphasis on carefully selected accessories: Smart toilet four most important accessory is the computer board, stepper motor, inlet valves and dampers. As smart toilet is long-term storage in a humid bathroom, so the computer board must have excellent insulation moisture-proof plastic, guaranteed in wet harsh environments not short-circuit, stable operation, in this respect than the imported computer board would regulate domestic Many. Stepper motor control and out of the boom, when using spray bar is often stuck stepper motor problem. Inlet valve is a smart toilet watertight core. Damper is to achieve the toilet seat slow down function accessories. Best to ask when buying these accessories from. Appearance, hand rubbing surface of the toilet, to smooth Xirun, toilet exterior styling is simple little better groove, it was easier to clean.
6, after-sales service is also very important: Intelligent Toilet belong technology products, maintenance is very troublesome, be sure to ask when buying the warranty period and detailed terms.
Second, smart toilet maintenance is what
Make sure the power is disconnected before maintenance status, maintenance Do not make the process of internal water enters the product, be sure to scrub clean after cleaning detergent, avoid remaining in the bidet toilet body and the gap between.
Cleaning steps:
1, close the inlet valve;
2, with a special tool Unscrew the aerator;
3, with a toothbrush or small brush cleaning dirt.
4 vents: Press head cleaning button, there is water around the spill spout for nozzle cleaning; clenched hand and pull the nozzle to clean nozzle and tube head parts; cleaning, use a soft cloth moistened cleaning; Finally press Stop button to stop the water.
5, cleaning kit and deodorant deodorant suction port, if there is still produce odor, replace deodorant; deodorant deodorant box and dust suction mouth, or other attachments, the suction air flow will be reduced that can be used such as a toothbrush or small brush to clean the dust.
6, water pipes filter cleaning: When there is dirt clogged water filter, it may lead to wash when no water or strong enough, so regular cleaning.
①, turn off the water angle valve, stop the water. Note: When the water angle valve still open, do not remove the water filter, otherwise the water will spray.
②, remove the water filter.
③, cleaning the filter removed after the water line will be attached to spam filtering rinse; generally small garbage please use a toothbrush and other items to be cleaned; slightly larger garbage please use a cotton swab and other objects to clear it.
④, install water filters, as is replacing the later installation tool to tighten it, otherwise it will cause leaks. Note: Place the water filter firmly tighten, as this may cause leaks.
⑤, open Control Stop, check for leaks at the inlet angle valve. NOTE: Do not clean the filter with a detergent, apply tap water. Do not force out the filter, as this may deform or rupture.
7, in the winter to prevent ice caused the damage smart toilet, please surplus water when not exhausted. Unused for long periods should also be exhausted surplus water. Water left exhausted steps: a. Closed inlet valve; b. Unscrew and remove the drain bolt; c. Residual water drainage exhausted after retighten bolts.
Quienes Somos
